Edited by fabio336, 29 May 2012 - 00:20.
modem telecom
#21
Posted 12 April 2012 - 18:43
#22 Guest_nick-86_*
Posted 12 April 2012 - 18:48
Edited by nick-86, 17 April 2012 - 21:28.
#23
Posted 12 April 2012 - 18:55
Edited by fabio336, 29 May 2012 - 00:20.
#24
Posted 12 April 2012 - 22:38
io ho messo una di queste in ogni piano; però non sono il massimo in quanto per un collegamento ottimale bisognerebbe usare dei capicorda.
che altri soluzioni ci sono? (ovviamente scatole telecom)
#25
Posted 12 April 2012 - 23:02
Edited by fabio336, 29 May 2012 - 00:19.
#26
Posted 12 April 2012 - 23:04
#27
Posted 12 April 2012 - 23:27
Edited by fabio336, 29 May 2012 - 00:19.
#28
Posted 13 April 2012 - 00:24
poi parli tu, che hai collegato il filtro con un accoppiatore
http://imageshack.us...0412234059.jpg/
#29
Posted 13 April 2012 - 00:49
Edited by fabio336, 29 May 2012 - 00:18.
#30
Posted 13 April 2012 - 01:07
#31
Posted 13 April 2012 - 01:13
Edited by fabio336, 29 May 2012 - 00:24.
#32
Posted 13 April 2012 - 01:20
#33 Guest_nick-86_*
Posted 13 April 2012 - 10:02
btw il benedetto tecnico non s'è fatto vedere...
Edited by nick-86, 17 April 2012 - 21:28.
#34
Posted 13 April 2012 - 10:10
Edited by fabio336, 29 May 2012 - 00:24.
#35 Guest_nick-86_*
Posted 13 April 2012 - 10:39
Edited by nick-86, 17 April 2012 - 21:28.
#36
Posted 13 April 2012 - 10:52
Edited by fabio336, 29 May 2012 - 00:24.
#37
Posted 13 April 2012 - 15:30
specifico anche che il filetto non tiene più
#38
Posted 13 April 2012 - 15:38
Edited by fabio336, 29 May 2012 - 00:23.
#39
Posted 13 April 2012 - 15:59
ovviamente non posso usare i fori da 503 in quanto troppo vicini alla scatola...
inoltre: una presa è incassata DENTRO uno specchio (vi è una maschera poco più grande), indi per cui non riuscirei a mettere quella placca...