chissene delle licenze, devo anche sapere i brevetti?
tanto si scannano cmq
No dai è grave
Inviato 28 febbraio 2012 - 23:41
chissene delle licenze, devo anche sapere i brevetti?
tanto si scannano cmq
The thing I hate the most is to trample on other people’s good will.
Inviato 28 febbraio 2012 - 23:46
- Amare la Formattazione è la Soluzione al 90% dei Problemi della Vita
Inviato 29 febbraio 2012 - 14:32
- Amare la Formattazione è la Soluzione al 90% dei Problemi della Vita
Inviato 29 febbraio 2012 - 15:16
si, non è servito ad un cazzo...
forse dovevo andare avanti!
Inviato 29 febbraio 2012 - 15:25
non lavoro con la merda io
Messaggio modificato da Wolfhwk il 29 febbraio 2012 - 15:25
Inviato 29 febbraio 2012 - 15:37
e mi dici che chi lavora in cisco PUO' non sapere queste cose?
ma inculati va
non a caso richiedono il ccna.
Inviato 29 febbraio 2012 - 16:45
Messaggio modificato da Wolfhwk il 29 febbraio 2012 - 16:46
Inviato 29 febbraio 2012 - 17:01
tu hai scritto "perche' programmare in assembly quando c'e' il visual basic"
Messaggio modificato da TigerShark il 29 febbraio 2012 - 17:02
Inviato 29 febbraio 2012 - 17:25
Inviato 29 febbraio 2012 - 18:17
Inviato 29 febbraio 2012 - 20:57
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service internal
service sequence-numbers
!
hostname HDSL_ptp_CED
clock timezone MET 1
clock summer-time MET-DST recurring last Sun Mar 2:00 last Sun Oct 3:00
ip subnet-zero
no ip source-route
logging buffered 4096 notifications
logging console informational
ip cef
clock timezone CET 2
username xxxxx privilege 15 password 0 yyyyyyyy
!
!
bridge irb
!
!
interface FastEthernet0/0
ip address 172.16.10.5 255.255.255.0
interface ATM1/0
no ip address
no ip directed-broadcast
no atm ilmi-keepalive
ima-group 1
scrambling-payload
!
interface ATM1/1
no ip address
no ip directed-broadcast
no atm ilmi-keepalive
ima-group 1
scrambling-payload
!
interface ATM1/2
!
interface ATM1/3
!
interface ATM1/IMA1
bandwidth 4096
no ip address
no ip directed-broadcast
no atm ilmi-keepalive
!
interface ATM1/IMA1.1 point-to-point
description HDSL Punto Punto
pvc 10/35
encapsulation aal5snap
!
bridge-group 1
!
interface BVI1
ip address 10.0.0.1 255.255.255.248
!
ip classless
ip route 0.0.0.0 0.0.0.0 BVI1
no ip http server
dot11 syslog
no ip source-route
no ip gratuitous-arps
!
bridge 1 protocol ieee
bridge 1 route ip
banner motd ^C
#########################################################
# #
# Access is for authorized users only. #
# #
# All activities to and from this server are logged. #
# If you don't like this then please disconnect. #
# #
#########################################################
^C
!
line con 0
no modem enable
line aux 0
line vty 0 4
transport input telnet
login local
!
ntp clock-period 17179696
ntp server 193.204.114.232
ntp server 193.204.114.233
end
The thing I hate the most is to trample on other people’s good will.
Inviato 29 febbraio 2012 - 21:39
FIRMA FOTTUTAMENTE EDITATA. IL FOTTUTO STAFF.
Mai più giorni felici
Inviato 01 marzo 2012 - 08:27
The thing I hate the most is to trample on other people’s good will.
Inviato 01 marzo 2012 - 08:57
Nessuno che mi ricopre d'insulti per la config del router?
Messaggio modificato da Wolfhwk il 01 marzo 2012 - 09:00
Inviato 01 marzo 2012 - 13:03
transport input telnet
Sembrerebbe quasi configurato da SDM (Security Device Manager)
The thing I hate the most is to trample on other people’s good will.
Inviato 01 marzo 2012 - 14:36
Voglia zero di buttare su ssh visto che lavora su un segmento privato
Inviato 02 marzo 2012 - 00:14
Postami un sh ip protocols.
The thing I hate the most is to trample on other people’s good will.
Inviato 02 marzo 2012 - 08:45
Inviato 21 marzo 2012 - 17:13
Messaggio modificato da Wolfhwk il 21 marzo 2012 - 17:18